Technical Datasheets

MM1000i ( 6 - 40") Flange Facing Machine

An internally mounted flange facing machine for all types of flange facing, flange seal grooves, weld preparation and counter bores. Facing Range: 6.0 - 40.0" Clamping Range: 5.7 - 32.0"

Download datasheet

MM2000i (24 - 80") Flange Facing Machine

An internally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation, counter boring and heat exchanger repair. Facing Range: 24.0 - 80.0" Clamping Range: 24.0 - 72.0"

Download datasheet

MM3000i (45 - 120") Flange Facing Machine

An internally mounted flange facing machine for flange facing, seal grooves, weld preparation and counter boring with patented power tool post. Facing Range: 45.0 - 120.0" Clamping Range: 44.0 - 110.0"

Download datasheet

ESF260i Bespoke Spot Facing Machine

An internally mounted lightweight yet robust spot facing machine for all types of fabrication, developed predominantly for large construction vehicle production. 2.5 – 10.2” ( 63 – 260mm)

Download datasheet

DDU1636 (16 - 36") Casing Double Pin Drill

A casing drilling unit for all lift pinning operations. Used in conjunction with the band saw to provide a very efficient method of cutting and decommissioning pipeline, conductors, caissons and multiple grouted strings. Drilling Range: 7.0 - 36.0" Stroke: 0.0 - 30.0"

Download datasheet

CHT3000 Rental Hot Tapping Machine

A Hot Tapping machine with a design pressure capacity of 5000 p.s.i maximum and can hot tap from Ø12 – 36” specifically designed for all pipeline intervention and wellhead maintenance. 120” stroke Ø12 - 36” capacity

Download datasheet

CHT3000 (12 - 36") Hot Tapping Machine

A hot tapping machine with a design pressure capacity of 5000 p.s.i maximum and can Hot tap from Ø12 – 36” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 12.0 - 36.0" Stroke: 0.0 - 120.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

CHT2000 (6 - 24") Hot Tapping Machine

A hot tapping machine that have a working pressure capacity of 5000 p.s.i maximum and can Hot tap from Ø6 – 24” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 6.0 - 24.0" Stroke: 0.0 - 80.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

CHT1675 (3 - 16") Hot Tapping Machine

Hot Tapping machine with a working pressure capacity of 5000 p.s.i maximum and can Hot tap from Ø3 – 16” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 3.0 - 16.0" Stroke: 0.0 - 66.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

GMRF1000 (40" stroke) Gantry Mill Drive Kit

A modular linear rail kit to convert our 2 axis milling machines to a large area 3 axis milling machine in situ. Used for heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more. X axis Stroke: 0.0 - 40.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 0.0

Download datasheet

CHT1000 Rental Hot Tapping Machine

A Hot Tapping machine with a working pressure capacity of 5000 p.s.i maximum and can hot tap from Ø3 – 12” specifically designed for all pipeline intervention and wellhead maintenance. 40” stroke Ø3 - 12” capacity

Download datasheet

CHT815 (2 - 10") Hot Tapping Machine

A hot tapping machine with a working pressure capacity of 5000 p.s.i maximum, specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 2.0 - 10.0" Stroke: 0.0 - 32.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

CHT635LP (2 - 12") Hot Tapping Machine

A hot tap machine with 500 p.s.i capacity designed for hot tapping into utility (water and gas) pipe lines. The machine has a compact design to keep ground work to a minimum. Size Range: 2.0 - 12.0" Stroke: 0.0 - 25.0" Pressure Rating: 0.0 - 500.0psi

Download datasheet

BS3248 Rental Portable Band Saw

A portable band saw used for all tubular severance, especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or subsea applications. (32 - 48")

Download datasheet

BS3248 (36 - 48") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications. Size Range: 36.0 - 48.0" Clamping range: 36.0 - 48.0"

Download datasheet

BS1636 (16 - 36") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications. Size Range: 36.0 - 48.0" Clamping range: 36.0 - 48.0"

Download datasheet

BS924 (9 - 24") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications where the saw can be deployed by ROV. Size Range: 9.0 - 24.0" Clamping range: 9.0 - 24.0"

Download datasheet

BLG1000 Bespoke Belt Grinding Machine

A heavy duty belt grinding machine to machine large rollers with heavy duty belt grinding head and optional belt grit for heavy metal removal or fine polishing. Ø4” – 197” diameters

Download datasheet

MM1080ie ( 0 - 157") Flange Facing Machine

A unique concept for flange facing in that our machine canbe used mounted internally or externally. Orbital milling is an additional option for efficient machining of larger flanges. Facing Range: 0.0 - 157.0" Clamping Range: 12.0 - 96.0" *Clamping- External: 305 - 1067mm Internal: 1400 - 2800mm Machining- External: 0 - 1067mm Internal: 1400 - 4000mm

Download datasheet

MM1500i (12 - 60") Flange Facing Machine

An internally mounted flange facing machine for flange facing, seal grooves, weld preparation and counter boring with patented power tool post. Facing Range: 12.0 - 60.0" Clamping Range: 11.5 - 55.0"

Download datasheet

HT60VF (0 - 6") Portable Drill

A versatile portable drilling and boring machine for general drilling and stud removal applications. The machine can be bolted directly to the work piece or have our new optional switch magnet base. Drilling Range: 0.0 - 6.0" Stroke: 0.0 - 17.0"

Download datasheet

MR2000 (80" stroke) 2 Axis Milling Machine

A milling rail that is built for rigidity yet with lightweight cast rail giving a 2 axis milling machine ideal for all general purpose in situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 80.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 3.5"

Download datasheet

MR3000 (120" stroke) 2 Axis Milling Machine

A milling rail that is built for rigidity yet with lightweight cast rail giving a 2 axis milling machine ideal for all general purpose in situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 120.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 3.5"

Download datasheet

MM305i (2 - 12") Flange Facing Machine

An internally mounted lightweight flange facing machine for all types of flange faces, seal grooves, rtj flanges, weld preparations and counter bores. Facing Range: 2.0 - 12.0" Clamping Range: 2.0 - 9.0"

Download datasheet

CHT635LP (2 - 12") Hot Tapping Machine

A hot tap machine with 500 p.s.i capacity designed for hot tapping into utility (water and gas) pipe lines. The machine has a compact design to keep ground work to a minimum. Size Range: 2.0 - 12.0" Stroke: 0.0 - 25.0" Pressure Rating: 0.0 - 500.0psi

Download datasheet

MM200e (0-8") Flange Facing Machine

An externally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring. Facing Range: 0.0 - 8.0" Clamping Range: 3 - 8.25"

Download datasheet

MM860i (6 - 34") Flange Facing Machine

An internally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring. Facing Range: 6.0 - 34.0" Clamping Range: 5.7 - 32.0"

Download datasheet

HTM100 (1/2 - 4") Hot Tapping Machine

A version of our HTM machines that have a maximum working pressure capacity of 1480 p.s.i and can drill from (1/2” – 4”) specifically designed for the water, gas and petrochemical industries. Size Range: 0.5 - 4.0" Stroke: 0.0 - 18.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

LSA14-20 (14 - 20") Line Stop Actuator

Hydraulically actuated line stop machine to create a temporary pipe line isolation. Size Range: 14.0 - 20.0" Stroke: 0.0 - 102.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

BS924 (9 - 24") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications where the saw can be deployed by ROV. Size Range: 9.0 - 24.0" Clamping range: 9.0 - 24.0"

Download datasheet

MM1080ie Rental Flange Facing Machine

A unique new concept in flange facing with the machine having the capability to mount internally or externally. 0 – 120” (0 – 3050mm)

Download datasheet

HT20 Rental Portable Drill

A versatile portable drilling and boring machine for general drilling and stud removal applications. The machine can be bolted directly to the work piece or have our new optional switch magnet base. 12” stroke Ø2” capacity

Download datasheet

MCT250 Casing Threading Machine

An externally mounted casing threading tool for machining or repairing in situ all types of API tapered buttress make up threads. 7 – 10” ( 177 – 254mm)

Download datasheet

MHT4-20 (4 - 20") Hot Tapping Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT4-20 is designed for ease of use with 1 (or optional 4) speed fixed feed gearbox, measuring rod and either pneumatic or hydraulic helical geared drive. Size Range: 4.0 - 20.0" Stroke: 0.0 - 72.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

MHT12-36 (12 - 36") Hot Tapping Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT12-36 is designed for ease of use with 1 speed (4 speed available) fixed feed gearbox, measuring rod and either pneumatic or hydraulic helical geared drive. Size Range: 12.0 - 36.0" Stroke: 0.0 - 108.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

HT50 (0 - 5") Portable Drill

A versatile portable drilling and boring machine for general drilling and stud removal applications. The machine can be bolted directly to the work piece or have our new optional switch magnet base. Drilling Range: 0.0 - 5.0" Stroke: 0.0 - 17.0"

Download datasheet

HT50 Rental Portable Drill

A versatile portable drilling and boring machine for general drilling and stud removal applications. The machine can be bolted directly to the work piece or have our new optional switch magnet base. 16” stroke Ø5” capacity

Download datasheet

T30 (0 - 3") Portable Tapping Machine

A portable lightweight heavy duty tapping machine for all general purpose on site tapping and flange stud tapping. The machine features precise control to enable blind or through hole tapping on a variety of sizes. Drilling Range: 0.0 - 3.0" Stroke: 0.0 - 12.0"

Download datasheet

HTM150XL Rental Hot Tapping Machine

A version of our HTM machines that have a maximum working pressure capacity of 1480 p.s.i and can hot tap from Ø1/2 – 6” specifically designed for the water, gas and petrochemical industries. 32” stroke Ø1/2 - 6” capacity

Download datasheet

CHT815 (2 - 10") Hot Tapping Machine

A hot tapping machine with a working pressure capacity of 5000 p.s.i maximum, specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 2.0 - 10.0" Stroke: 0.0 - 32.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

MHT24-60 (24 - 60") Hot Tap Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT24-60 is designed for ease of use with 1 speed (4 speed option available) fixed feed gearbox, measuring rod and high torque hydraulic helical geared drive. Size Range: 24.0 - 60.0" Stroke: 0.0 - 157.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

LB100 (6 - 36") Portable Line Boring Machine

A precision heavy duty line boring machine for stern tubes, rudder bores, hinge pins, gearboxes, turbines and many more applications. Diameter Range: 6.0 - 36.0" Stroke: 0.0 - 0.0 Max Bar Length: 120.0 - 295.0"

Download datasheet

MM2000i (24 - 80") Flange Facing Machine

An internally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation, counter boring and heat exchanger repair. Facing Range: 24.0 - 80.0" Clamping Range: 24.0 - 72.0"

Download datasheet

CHT1675 (3 - 16") Hot Tapping Machine

Hot Tapping machine with a working pressure capacity of 5000 p.s.i maximum and can Hot tap from Ø3 – 16” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 3.0 - 16.0" Stroke: 0.0 - 66.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

SRB3000 Bespoke Trunnion Turning Machine

refurbishing the bearing surface on a variety of diameters to high tolerances in both parallelism and concentricity. (An optional internal machining kit is also available) 60 – 177” ( 1500 – 4500mm)

Download datasheet

OM3500 – Orbital Milling Machine

A unique concept for the machining of flanges which provides fast material removal with high accuracy. Specifically developed for the machining of large flanges, wind turbine rotor blades and wind turbine tower flanges.

Download datasheet

SSC2448 Bespoke Single String Cutter

A portable internal mechanical cutting machine for piles or members from 24” to 48” diameter.

Download datasheet

MHT12-42 (12-42") Hot Tapping Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT3-12 is designed for ease of use with 1 speed (4 speed option available) fixed feed gearbox, measuring rod and either pneumatic or hydraulic helical geared drive. Size Range: 12.0 - 42.0" Stroke: 0.0 - 130.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

MHSF300-1220 Bespoke Pipe Cutting / Bevelling Mach

A heavy duty split frame pipe cutting and bevelling machine that has been designed primarily for casing cutting and can operate with inserted tooling. The machine can be used to cut through pipe with wall thickness of up to 4” in most materials. Ø4 - 48” capacity

Download datasheet

MM300e (0 - 12") Flange Facing Machine

An externally mounted flange facing machine for all types of flnges, seal grooves, weld preps and counter bores. Facing Range: 0.0 - 12.0" Clamping Range: 2.0 - 12.0"

Download datasheet

MRY1500 (60" stroke) 3 Axis Milling Machine

A 3 axis milling machine that is built for rigidity and accuracy suitable for all general purpose in situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 60.0" Y Axis stroke: 0.0 - 12.0" Z axis stroke: 0.0 - 3.5"

Download datasheet

MBS355-H Bolt Slitting Saw

The MBS 355-H Slitting Saw has been designed for cutting studs between API 16 3/4” or API 13 5/8” flange

Download datasheet

MST300-915 Bespoke Turning Machine

A heavy duty mid shaft turning machine that includes drive and support bearings (split half design). Eight jaw mounting on both drive & support bearings. Eccentric preload on both drive & support bearings. The machine is adjustable so that the shaft can be turned completely parallel and true. The modular construction allows future adaptability to customers changing requirements. Ø100 – 915mm (4” – 36”)

Download datasheet

LSA4-12 (4 - 12") Line Stop Actuator

Hydraulically operated line stop actuator used to temporary isolate a section of pipeline for repair, shutdown or maintenance without the need to shut the line. Size Range: 4.0 - 6.0" Stroke: 0.0 - 72.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

OM6000 (98 - 237") Orbital Milling Machine

Unique concept for machining of large diameter flanges which provides fast material removal with high overall flatness accuracy. Specifically developed for machining large crane pedestals and hydroelectric repairs as well as being used in the ship building industry. Facing Range: 102.0 - 237.0" Clamping Range: 102.0 - 200.0"

Download datasheet

MM600e (0 - 24") Flange Facing Machine

An externally mounted flange facing machine for all types of flange facing, seal groove machining, weld preparation and counter boring. Facing Range: 0.0 - 24.0" Clamping Range: 12.0 - 24.0"

Download datasheet

LB150 (16 - 80") Portable Line Boring Machine

A precision heavy duty line boring machine for stern tubes, rudder bores, hinge pins, gearboxes, turbines and many more applications. Diameter Range: 16.0 - 80.0" Stroke: 0.0 - 0.0 Max Bar Length: 60.0 - 295.0"

Download datasheet

HT40 (0 - 4") Portable Drill

A versatile portable drilling and boring machine for general drilling and stud removal applications. The machine can be bolted directly to the work piece or have our new optional switch magnet base. Drilling Range: 0.0 - 4.0" Stroke: 0.0 - 16.0"

Download datasheet

CHT3000 Rental Hot Tapping Machine

A Hot Tapping machine with a design pressure capacity of 5000 p.s.i maximum and can hot tap from Ø12 – 36” specifically designed for all pipeline intervention and wellhead maintenance. 120” stroke Ø12 - 36” capacity

Download datasheet

LSA36-48 (36 - 48") Line Stop Actuator

Hydraulically operated line stop actuator used for temporary pipeline isolation. Size Range: 36.0 - 48.0" Stroke: 0.0 - 165.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

BS3248 (36 - 48") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications. Size Range: 36.0 - 48.0" Clamping range: 36.0 - 48.0"

Download datasheet

MSF730 & MSF915 Rental Pipe Cutting & Bevelling

A heavy duty split frame pipe cutting and bevelling machine that has been designed primarily for casing cutting and can operate with inserted tooling. The machine can be used to cut through pipe with wall thickness of up to 4” in most materials. Ø4 - 48” capacity

Download datasheet

VHT965-4000 Bespoke Valve Hot Tapping Machine

A version of our CHT machines that have a pressure capacity of 5000 p.s.i maximum and can hot tap from 4-120” - stroke specifically designed for oil and gas high pressure wellhead maintenance and OMV valve drilling. 40 - 160” stroke

Download datasheet

MRY3000 (120" stroke) 3 Axis Milling Machine

A 3 axis milling machine that is built for rigidity and accuracy suitable for all general purpose in-situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 120.0" Y Axis stroke: 0.0 - 12.0" Z axis stroke: 0.0 - 3.5"

Download datasheet

CHT1000 (3 - 12") Hot Tapping Machine

A hot tapping machine with a working pressure capacity of 5000 p.s.i maximum and can hot tap from Ø3 – 12” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 3.0 - 12.0" Stroke: 0.0 - 40.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

LMR1000 (40”) Linear Milling Machine

A milling rail that is built for rigidity yet with lightweight aluminium rail, giving a 2 axis milling machine for all general purpose in-situ milling, but primarily designed for use on heat exchangers. This machine can also be utilised on pump and motor pads, steel mill stands, in ship building and on turbine split lines, along with its ability to be mounted to the Mirage gantry rail kit.

Download datasheet

MHT3-12 (3 - 12") Hot Tapping Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT3-12 is designed for ease of use with 1 (or optional 4) speed fixed feed gearbox, measuring rod and either pneumatic or hydraulic helical geared drive. Size Range: 3.0 - 12.0" Stroke: 0.0 - 42.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

VB200 & VB650 Bespoke Valve Boring Machines

A precision valve boring machine for MSIV valves, globe valves, turbine throttle, control valves, safety valves and stop check valves. The machine provides a surface finish on the valve pressure seal area, guide ribs and seat that requires minimal grinding/lapping.

Download datasheet

MHT8-24 (8 - 24") Hot Tapping Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT8-24 is designed for ease of use with 1 (or optional 4) speed fixed feed gearbox, measuring rod and either pneumatic or hydraulic helical geared drive. Size Range: 8.0 - 24.0" Stroke: 0.0 - 80.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

MM1080ie ( 0 - 157") Flange Facing Machine

A unique concept for flange facing in that our machine canbe used mounted internally or externally. Orbital milling is an additional option for efficient machining of larger flanges. Facing Range: 0.0 - 157.0" Clamping Range: 12.0 - 96.0" *Clamping- External: 305 - 1067mm Internal: 1400 - 2800mm Machining- External: 0 - 1067mm Internal: 1400 - 4000mm

Download datasheet

MR1000 (40" stroke) 2 Axis Milling Machine

A milling rail that is built for rigidity yet with lightweight cast rail giving a 2 axis milling machine ideal for all general purpose in situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 40.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 0.0

Download datasheet

MM1000i ( 6 - 40") Flange Facing Machine

An internally mounted flange facing machine for all types of flange facing, flange seal grooves, weld preparation and counter bores. Facing Range: 6.0 - 40.0" Clamping Range: 5.7 - 32.0"

Download datasheet

PD1080 Bespoke Turbine Pin Drill

A turbine pin drilling machine to drill out blade retaining pins on turbines in confined spaces between L0, L1 and L2 - 140mm (5.5”) – 225mm (8.8”). 1080mm - 42” Max. Mounting Diameter

Download datasheet

LSA22-34 (22 - 34") Line Stop Actuator

Hydraulically actuated line stop machine to temporarily isolate live pipelines. Size Range: 22.0 - 34.0" Stroke: 0.0 - 140.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

CHT2000 (6 - 24") Hot Tapping Machine

A hot tapping machine that have a working pressure capacity of 5000 p.s.i maximum and can Hot tap from Ø6 – 24” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 6.0 - 24.0" Stroke: 0.0 - 80.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

T725 ( 0 - 71/4") Portable Tapping Machine

A portable heavy duty tapping machine for all general purpose on site tapping and flange stud tapping. The machine has precise control features to enable blind or through hole tapping over a range of sizes. Drilling Range: 0.0 - 7.3" Stroke: 0.0 - 13.0"

Download datasheet

MHT4-16 (4 - 16") Hot Tapping Machine

A hot tapping machine used to make connections and branches to pipelines without shut down either surface or sub sea. The Mirage MHT4-16 is designed for ease of use with 1 (or optional 4) speed fixed feed gearbox, measuring rod and either pneumatic or hydraulic helical geared drive. Size Range: 4.0 - 16.0" Stroke: 0.0 - 66.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

BS3248 Rental Portable Band Saw

A portable band saw used for all tubular severance, especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or subsea applications. (32 - 48")

Download datasheet

GMRF1000 (40" stroke) Gantry Mill Drive Kit

A modular linear rail kit to convert our 2 axis milling machines to a large area 3 axis milling machine in situ. Used for heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more. X axis Stroke: 0.0 - 40.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 0.0

Download datasheet

GM3000 Rental Gantry Mill Kit

A linear rail kit to convert a 2 axis milling machine to a large area 3 axis milling machine in-situ. Used for heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more.

Download datasheet

BS1636 (16 - 36") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications. Range: 16.0 - 36.0" Clamping range: 16.0 - 36.0"

Download datasheet

BS3248 (36 - 48") Portable Band Saw

A portable band saw used for all tubular severance especially for cutting conductors, caissons and multiple grouted strings of various sizes in either surface or sub sea applications. Size Range: 36.0 - 48.0" Clamping range: 36.0 - 48.0"

Download datasheet

MM1080ie Rental Flange Facing Machine

A unique new concept in flange facing with the machine having the capability to mount internally or externally. 0 – 120” (0 – 3050mm)

Download datasheet

HTM150XL (1/2 - 6") Hot Tapping Machine

A version of our HTM machines that have a maximum working pressure capacity of 1480 p.s.i and can hot tap from Ø1/2 – 6” specifically designed for the water, gas and petrochemical industries. Size Range: 0.5 - 6.0" Stroke: 0.0 - 32.0" Pressure Rating: 0.0 - 1480.0psi

Download datasheet

MRY2000 (80" stroke) 3 Axis Milling Machine

A 3 axis milling machine that is built for rigidity and accuracy suitable for all general purpose in-situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 80.0" Y Axis stroke: 0.0 - 12.0" Z axis stroke: 0.0 - 3.5"

Download datasheet

WP2500 (60 - 98") Orbital Milling Machine

A unique concept for the machining of flanges which provides fast material removal with high accuracy. Specifically developed for the production machining of wind turbine rotor blades. Facing Range: 56.0 - 98.0" Clamping Range: 60.0 - 90.0"

Download datasheet

WP4500 (98 – 178”) Orbital milling machine

A unique concept for the machining of flanges which provides fast material removal with high accuracy. Specifically developed for the production machining of larger offshore wind turbine rotor blades. Facing Range: 98 - 178" Clamping Range: 98 - 157"

Download datasheet

HT20 (0 - 2") Portable Drill

A versatile portable drilling and boring machine for general drilling and stud removal applications. The machine can be bolted directly to the work piece or have our new optional switch magnet base. Drilling Range: 0.0 - 2.0" Stroke: 11.0 - 0.0"

Download datasheet

OM2500 – Orbital Milling Machine

A unique concept for the machining of flanges which provides fast material removal with high accuracy. Specifically developed for the machining of large flanges, wind turbine rotor blades and wind turbine tower flanges.

Download datasheet

MR1500 (60" stroke) 2 Axis Milling Machine

A milling rail that is built for rigidity yet with lightweight cast rail giving a 2 axis milling machine ideal for all general purpose in situ milling. Used on heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more applications. X axis Stroke: 0.0 - 60.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 3.5"

Download datasheet

CHT3000 (12 - 36") Hot Tapping Machine

A hot tapping machine with a design pressure capacity of 5000 p.s.i maximum and can Hot tap from Ø12 – 36” specifically designed for all pipeline intervention and wellhead maintenance. Size Range: 12.0 - 36.0" Stroke: 0.0 - 120.0" Pressure Rating: 0.0 - 5000.0psi

Download datasheet

OM8000 (138 - 315") Orbital Milling Machine

Unique concept for machining of large diameter flanges which provides fast material removal with high overall flatness accuracy. Specifically developed for machining large crane pedestals and hydroelectric repairs as well as being used in the ship building industry.

Download datasheet

MR500 (20" stroke) 2 Axis Milling Machine

X axis Stroke: 0.0 - 20.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 3.5"

Download datasheet

OM4500 (98 - 178") Orbital Milling Machine

A unique concept for machining of large diameter flanges which provides fast material removal with high overall flatness accuracy. Specifically developed for machining large crane pedestals and hydroelectric repairs as well as being used in the ship building industry. Facing Range: 98.0 - 178.0" Clamping Range: 98.0 - 160.0"

Download datasheet

WP3500 (60 - 137") Orbital milling machine

A unique concept for machining of flanges which provides fast material removal with high overall flatness accuracy. Specifically developed for machining larger offshore wind turbine rotor blade end faces. Facing Range: 60.0 - 137.0" Clamping Range: 60.0 - 110.0"

Download datasheet

LMR1500 (60”) Linear Milling Machine

A milling rail that is built for rigidity yet with lightweight aluminium rail, giving a 2 axis milling machine for all general purpose in-situ milling, but primarily designed for use on heat exchangers. This machine can also be utilised on pump and motor pads, steel mill stands, in ship building and on turbine split lines, along with its ability to be mounted to the Mirage gantry rail kit.

Download datasheet

LMR2000 (80”) Linear Milling Machine

A milling rail that is built for rigidity yet with lightweight aluminium rail, giving a 2 axis milling machine for all general purpose in-situ milling, but primarily designed for use on heat exchangers. This machine can also be utilised on pump and motor pads, steel mill stands, in ship building and on turbine split lines, along with its ability to be mounted to the Mirage gantry rail kit.

Download datasheet

LB3060 (1.5 - 24") Portable Line Boring Machine

A modular, lightweight yet robust line boring machine for buckets, hinge pins, gearboxes and many more applications with the drive being capable of accepting bore welding equipment. Diameter Range: 1.5 - 24.0" Stroke: 0.0 - 24.0" Max Bar Length: 0.0 - 120.0"

Download datasheet

CHT1000 SSW Subsea Hot Tapping Machine

The Mirage CHT1000-SSSW Hot Tapping Machine has been designed to hot tap into live pipelines to a depth of 300m sub-sea. The machine has a working pressure capacity of 5000 psi and can hot tap from 3 – 12”.

Download datasheet

RTJ Measuring Kit

An accurate method for measuring RTJ grooves in flanges with type R, BX seal dimensions.

Download datasheet

MM610i ( 2 - 24") Flange Facing Machine

An internally mounted lightweight yet strong flange facing machine. Facing Range: 2.0 - 24.0" Clamping Range: 2.0 - 20.0"

Download datasheet

MiniMill.pdf

A lightweight yet robust three axis milling machine primarily designed for the repair of worn key ways.

Download datasheet