GMRF1000 (40" stroke) Gantry Mill Drive Kit
A modular linear rail kit to convert our 2 axis milling machines to a large area 3 axis milling machine in situ. Used for heat exchangers, pump and motor pads, steel mill stands, ship building, turbine split lines and many more.
X axis Stroke: 0.0 - 40.0" Y Axis stroke: 0.0 - 0.0 Z axis stroke: 0.0 - 0.0
Features
- Modular jointing system for lengths up to 10m
- Linear rail and precison carriages
- Quick set up with jacking system
- Available in aut feed or manual system
Technical Specifications
Range
|
---|
Maximum Stroke | 1000mm | 40”
|
Feed – Pneumatic @ 6 bar (90 p.s.i) | 0.9 Hp | 0.67 Kw
|
Feed - - Hydraulic | 2.2 Hp | 1.64 Kw
|
Feed – hydraulic @ 70 bar (1050 p.s.i) | 20 L/min | 5 gal/min
|
Air consumption required | 98 s.c.f.m | 2.69 m3/m |
Feed Rates
|
---|
Hand feed (Feed / revolution) | 10mm / rev | 0..394”/ rev
|
Auto feed standard motor supply | 0 – 83 mm/min | 0 – 3.25”/min |
Machine Weight
|
---|
Machine weight | 142 kgs | 312 lbs |
Shipping Weights & Dimensions
|
---|
Shipping weight | 590 Kgs (1300 lbs)
|
Shipping dimensions | L - 248cm - (98”) W- 66cm (26”) H- 61cm (24”) |
GMRF1000H / GMRF1000A – 2 off linear rails and blocks, sub frame, rack feed, gear box, carriage and auto feed gearbox and motor, mounting plates, manual, tool kit, CE certification. Shipping and storage box.
GMRF1000M - 2 off linear rails and blocks, sub frame, rack feed, gear box, carriage and manual feed, mounting plates, manual, tool kit, CE certification. Shipping and storage box.